Draw Distance

**Draw Distance -** 06-13-2010, 06:29 AM

Hi guys,

So, I'm attempting to create something of a Mall in Alice. I have intended it to be quite large, however construction is difficult as the draw distance is too small, and as a result i have to run back and forth up the world to look at something i should just be able to face in order to see.

Is there a way to increase the Draw Distance?

Cheers.

06-13-2010, 07:36 AM

Open the camera's properties then expand the seldom used properties. The variable called farClippingPlaneDistance controls the draw distance- increase it to see further into the distance.

06-13-2010, 07:38 AM

Ah Thanks alot mate!

You just made my work a hell of a lot easier =D.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	#1 (permalink)
1nfam0us Guest Status: Posts: n/a	Draw Distance - 06-13-2010, 06:29 AM Hi guys, So, I'm attempting to create something of a Mall in Alice. I have intended it to be quite large, however construction is difficult as the draw distance is too small, and as a result i have to run back and forth up the world to look at something i should just be able to face in order to see. Is there a way to increase the Draw Distance? Cheers.

	#2 (permalink)
sam.no21 Guest Status: Posts: n/a	06-13-2010, 07:36 AM Open the camera's properties then expand the seldom used properties. The variable called farClippingPlaneDistance controls the draw distance- increase it to see further into the distance.

	#3 (permalink)
1nfam0us Guest Status: Posts: n/a	06-13-2010, 07:38 AM Ah Thanks alot mate! You just made my work a hell of a lot easier =D.