View Single Post
Old
arty-fishL
Senior Member
 
arty-fishL's Avatar
 
Status: Offline
Posts: 1,878
Join Date: Mar 2008
Location: In the corner of your eye
Default 03-20-2011, 07:51 PM

Simple issue, you shouldn't use poses with the camera.
If you want to position the camera, then:
  1. Move the camera to the position you want to save.
  2. Click the "ADD OBJECTS" button.
  3. On the right, click "more controls >>".
  4. Click "drop dummy at camera".
Repeat this for each position and then, instead of using "camera set pose to", do this:
  1. Click on camera in the object tree.
  2. Click on methods.
  3. Find "camera set point of view to".
  4. Use this and set its parameter to the dummy you want to position the camera at
    (ie "camera set point of view to dummy2")
You can rename the dummies if you want.

Hope this helped


█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█
█░░▓░░░░░░░▓░░░░░░░░░░░▓▓░░▓░░░░░░▓░░░▓░░░░█
█░▓░▓░▓▓▓░▓▓▓░▓░▓░░░░░░▓▒▒░░▒░░▓▓░▓▓▓░▓▒░░░█
█░▓▓▓▒▓▒▒▒░▓▒▒▓▓▓▒▓▓▓░▓▓▓░░▓░░░▓▒▒▓▒▓▒▓▒░░░█
█░▓▒▓▒▓▒░░░▓▓░░▒▓▒░▒▒▒░▓▒▒░▓▓░▓▓▒░▓▒▓▒▓▒░░░█
█░▓▒▓▒░▒░░░░▒▒▓▓▓▒░░░░▓▓▒░░░▒▒░▒▒░░▒░▒▓▓▓░░█
█░░▒░▒░░░░░░░░░▒▒▒░░░░░▒▒░░░░░░░░░░░░░░▒▒▒░█
█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█

I have mostly moved on from Alice, but may still respond to messages if important [-]
   
Reply With Quote