Assignment 2

Joshua Smith · **Assignment 2 -** 09-06-2011, 04:07 PM

For assignment 2, I chose the project 1.2, turning the dial on a ComboLock then unlatching it. The only trouble I had was figuring out how to make the latch appear open; I decided to have the latch move up a little.

MEC · **Assignment 2 -** 10-09-2011, 12:41 AM

I used the Combination lock also. I have the most trouble with the dial.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	#1 (permalink)
Joshua Smith Junior Member Status: Offline Posts: 5 Join Date: Aug 2011	Assignment 2 - 09-06-2011, 04:07 PM For assignment 2, I chose the project 1.2, turning the dial on a ComboLock then unlatching it. The only trouble I had was figuring out how to make the latch appear open; I decided to have the latch move up a little.

	#2 (permalink)
MEC Junior Member Status: Offline Posts: 11 Join Date: Sep 2011	Assignment 2 - 10-09-2011, 12:41 AM I used the Combination lock also. I have the most trouble with the dial.